Farm Equipment - question about d-10 grille

Print Page | Close Window

question about d-10 grille

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40723
Printed Date: 25 Aug 2025 at 3:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: question about d-10 grille

Posted By: dustinmo
Subject: question about d-10 grille
Date Posted: 17 Nov 2011 at 8:24pm

does anyone know where you could get the stuff that goes around the edge of a series 1 or 2 d-10 ir d-12, I made a grille out of a torn up d-19 grille and it turned out super sweet, but need that stuff to finish it and I dont even know what you would call it .thanks, Dustin

Replies:

Posted By: Tracy Martin TN
Date Posted: 17 Nov 2011 at 9:02pm

Dustin, if that is the rubber-plastic stuff, it is an edge ease. Should be able to get it at McMaster-Carr. If not there is probably a supplier of it on the net. HTH Tracy Martin

Posted By: dustinmo
Date Posted: 29 Nov 2011 at 7:45pm

tracy Thanks for turning me onto that place . Found the edge stuff and it matches with the 3 others almost exactly and it was cheap @ less than a dollar a foot, and if anyone is needing some it takes over 5 1/2 foot to go around a d10 or 12 grille so you better order atleast 6 foot, Dustin

Posted By: Tracy Martin TN
Date Posted: 29 Nov 2011 at 8:43pm

Dustin, you are more than welcome. Some here have been very helpful to myself, and thank them for it. Tracy Martin