Farm Equipment - wc mag timing

Print Page | Close Window

wc mag timing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=4056
Printed Date: 15 Jan 2025 at 1:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wc mag timing

Posted By: Tom IA
Subject: wc mag timing
Date Posted: 22 Nov 2009 at 5:14pm

Went though the process of setting the timing with no one cyl on compresion stroke,flywheel timing mark in center of hole,moved magtill it clicked,tractor runs but not the way it should checked with timing light,no timing mark,moved mag to camshaft tractor runs and starts the way it should,but i cant get the timing right on ,by moving the mag to camshaft one tooth the timing is either advanced a little or retarded a little ,can't move the mag enough to get it right on,have double checked the fiber gear timing and that is correct could i move it one tooth? runs great with it of a little bit each way but cant understand why I cant get it right on I have did this many times no problems can't understand this one THANK TOM

Replies:

Posted By: Kraig (WI)
Date Posted: 22 Nov 2009 at 6:18pm

I had the same problem once and found that I timed it 180 degs off.

Kraig

-------------
7010,D17D,WD45,WD,WC,WC,B,
Gleaner K,60,66,72