Farm Equipment - IH 2350 Loader on Allis possibility?

Print Page | Close Window

IH 2350 Loader on Allis possibility?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40329
Printed Date: 28 Sep 2025 at 8:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: IH 2350 Loader on Allis possibility?

Posted By: Adam Stratton
Subject: IH 2350 Loader on Allis possibility?
Date Posted: 09 Nov 2011 at 9:20pm

I have been looking around for an All-Terrain type forklift, but havent been having any luck. I am primarily wanting to unload seed pallets, and be able to pick up and move things like combine headers without having to hook up. I saw an IH 2350 that is supposed to lift something like 5000 lbs "Breakout force" and 3500 to the full height. I think that weight range would suit my needs. I dont know what brackets (if any) come with it, but can it be modified to fit an Allis tractor? My main possibilities would probably be 190 XT, 210, or 7045. Anyone have one or use one? Thanks in advance

Replies:

Posted By: m16ty
Date Posted: 09 Nov 2011 at 9:28pm

I've adapted several different brand loaders to different brand tractors. I haven't done the one in question though. The main thing to check is the frame width of the brackets if it comes with any. This makes fitting it on the tractor much easier.

Another problem you may run into is the Allis tends to be wider in the front grill area than most tractors. Make sure the loader arms are wide enough to clear the grill.

Just about any loader can be made to fit any tractor. Some are much easier than others though. The last one I did was a JD 175 loader on a Farmall 544. All I had to do is drill a few new holes. Best thing to do is get out your tape and take some measurements of your tractor and compare them to the loader.

Posted By: Dans 7080
Date Posted: 09 Nov 2011 at 9:41pm

There is a guy down the road that has a 2350 on a 7040. Im not sure what was done to make it fit, but it does and works well. The "breakout force" of a loader is not the lifting capacity but the force the bucket has to curl under a load. If the loader is rated for 3500 it will lift 3500 throughout its lift range. The 5000lb "breakout force" will not make the loader lift more.

Posted By: Adam Stratton
Date Posted: 09 Nov 2011 at 9:45pm

Thanks for clearing that up for me Dan. I didnt know if break out force was what it could lift off the ground (ie, breaking out a stuck rock or something), or what it meant exactly.

Posted By: SHAMELESS
Date Posted: 10 Nov 2011 at 3:40am

if you have a 3-pt hitch on something..go to http://www.gnusemfg.com - www.gnusemfg.com they make a strong fork lift that attaches to your 3 pt

Posted By: Jeff Z. NY
Date Posted: 10 Nov 2011 at 4:19am

Anything is possible if you have enough money.

-------------
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}

Posted By: Calvin Schmidt
Date Posted: 10 Nov 2011 at 5:16am

My yard forklift is a JCB 525 telahandler. 4x4 with 5000 lb. capacity to 22.' It has a Perkins engine and is the handiest thing you will ever own. Mine is a 1988 and I'm sure you could find a good one for under $10G. We also have a material bucket. We have 2 newer larger JCB's as jobsite machines. The big one can handle 10,000 lbs to 44'.

-------------
Nothing is impossible if it is properly financed

Posted By: BStone
Date Posted: 10 Nov 2011 at 5:35am

Don't have a 210 so I'm not for sure but I don't think the 190 would be my choice for a loader tractor.I had one and had trouble with the light front ends the 190's have.Have a 7045 and makes a much better loader tractor.

Posted By: tomNE
Date Posted: 10 Nov 2011 at 7:29am

most AC's come with only 2200lbs hyd pressure. you will have to shim the pump to 2500lbs. It's a cheap ez job. without making sure the pump puts out 2500lbs, you may be disappointed in the lifting power.

-------------
AC from the start of my families farming career till the end!

Posted By: Lonn
Date Posted: 10 Nov 2011 at 9:52am

I have a 2250 w/ joystick I put on a D19. Made the brackets. Couple hundred bucks in steel and some time. Going to put it on the 190 hopefully soon. D19 isn't the greatest loader tractor.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot