Farm Equipment - 5020 snowblower

Print Page | Close Window

5020 snowblower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39667
Printed Date: 25 Sep 2025 at 9:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 5020 snowblower

Posted By: Don Jr NY
Subject: 5020 snowblower
Date Posted: 28 Oct 2011 at 7:14am

Hi Guys. I purchased an A-C model 64 snowblower back in 2009 to mount on my 5020. I am just getting around to putting it on now. What I didn't realize is there are two tube like spacers needed to mount it to the tractor. The spacers bolt to each side of the tractor frame at the base of the battery tray in front of the radiator. No longer available thru AGCO. Brenda from Sandy Lake even tried to get me specs on them from AGCO but no luck. I even tried contacting the fellow I bought it from but his phone number is now disconnected. Would anyone out there have a set for sale or be willing to let me borrow them to have a set made? Any help is greatly appreciated. Thanks. Don Jr.

Replies:

Posted By: john(MI)
Date Posted: 28 Oct 2011 at 11:48am

A couple pieces of pipe with long bolts running through them sounds like a solution?

-------------
D14, D17, 5020, 612H, CASE 446

Posted By: orangeman
Date Posted: 29 Oct 2011 at 1:46am

Don Jr. Here is a possible solution. If you could obtain a illustrated parts manual for the blower that shows the spacers perhaps you could enlarge a copy on a photocopying machine and then fabricate them yourself or take to a local welder fabricator.

Seems like someone must have some that you could take measurements from. Best of luck on this.

Posted By: Don Jr NY
Date Posted: 03 Nov 2011 at 6:49am

Just bumping this up. Anyone have any I can copy or get measurements from? Thanks. Don Jr.