Farm Equipment - 7060 power shift

Print Page | Close Window

7060 power shift

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39613
Printed Date: 10 Oct 2025 at 9:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 power shift

Posted By: DansXT
Subject: 7060 power shift
Date Posted: 27 Oct 2011 at 12:06pm

What would cause 5th and 6th not to engage while the rest of the gears do?

Replies:

Posted By: XT in pa
Date Posted: 27 Oct 2011 at 3:00pm

check the linkage first and see if the lever is moving the control far enough.

Shawn

-------------
190XT,D17and 7045

Posted By: DrAllis
Date Posted: 27 Oct 2011 at 5:12pm

So, does it "click" into 5th and 6th and stop moving?? or does the lever not move that far ahead??

Posted By: Lester
Date Posted: 27 Oct 2011 at 6:29pm

Posted By: Lester
Date Posted: 27 Oct 2011 at 6:30pm

I got a 7020 powershift not too long ago and it also will not shift down to 4th like it should with clutch pushed halfway down . It wants to kill the tractor. Also it is easy to miss a speed and seems like there is too much play in the shifter.

Posted By: DansXT
Date Posted: 27 Oct 2011 at 7:33pm

tractor does lurch a little in 5th and stops, doesn't lurch in 6th and just rolls to a stop. Happened while hauling the second load of manure down the road.

Posted By: MACK
Date Posted: 27 Oct 2011 at 8:25pm

Are you sure 5-6 are the only gears that don't pull in? Hold the brakes and shift from 1 through 6 see if some others are week. MACK

Posted By: DrAllis
Date Posted: 27 Oct 2011 at 8:59pm

The next time you stick it in 5th or 6th and it stops moving, see if the power steering still works or not.

Posted By: DansXT
Date Posted: 28 Oct 2011 at 9:26pm

The power steering still works and other gears are fine. Could the A1 clutch set not be working since those two gears use that set and/or could the 6 bolts on clutch hub be broken too?