Farm Equipment - #5 sickle mower

Print Page | Close Window

#5 sickle mower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39217
Printed Date: 26 Jun 2024 at 10:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: #5 sickle mower

Posted By: Tim-tn
Subject: #5 sickle mower
Date Posted: 19 Oct 2011 at 12:15pm

Anybody have a manual for a #5 mower on a "C" model. My wife has a new "C" and a #5 sickle mower to go with it. The pressure is on to get it all together and mowing. Thanks.......

Replies:

Posted By: mdtractormechanic
Date Posted: 19 Oct 2011 at 12:53pm

Are you sure it's a no. 5 mower? That model was made for a CA tractor. The model BC series mower was made for the B & C tractor models.

-------------
Joe's 1939 Model WC, 1940 Model RC, 1944 & 1950 Model C's, B-125 PU

Posted By: Tim-tn
Date Posted: 19 Oct 2011 at 1:01pm

It could be a BC didn't really know what it was and got on the Agco website, and found the parts manual for the #5, it looks like what I have?

Posted By: mdtractormechanic
Date Posted: 19 Oct 2011 at 1:07pm

The sheaves (pulleys) on the rear of a BC mower has 1 belt. The no. 5 (CA) mower uses 2 belts. Which do you have?

-------------
Joe's 1939 Model WC, 1940 Model RC, 1944 & 1950 Model C's, B-125 PU

Posted By: Tim-tn
Date Posted: 19 Oct 2011 at 1:10pm

MD mine has only one belt that makes it a BC correct. I went back to Agco and looked at the BC, not a great deal of difference from looking at both. Thanks....

Posted By: Tim-tn
Date Posted: 19 Oct 2011 at 1:17pm

Need to reask my question, anybody got a manual for a BC mower on a "C". Thanks.....

Posted By: GlenninPA
Date Posted: 19 Oct 2011 at 1:19pm

To get free stuff, it is good to have an email registered...........

-------------
Good judgment comes from experience. Experience comes from bad judgment.
From listening comes wisdom and from speaking comes repentance.
Wise men learn more from fools than fools from the wise.

Posted By: Tim-tn
Date Posted: 19 Oct 2011 at 1:23pm

Glenn sent you a PM.

Posted By: Jeff(WD45-SATX-TN)
Date Posted: 19 Oct 2011 at 1:37pm

Ah...A new toy to join the other orange Tim?

Cool!

Finally got both my final drives rebuilt and back on the WD45.

Jeff

-------------
1954 WD45 NF "Iron Tater"

Posted By: Bill Long
Date Posted: 19 Oct 2011 at 4:55pm

The #5 mower was used for the CA and the B-C. It was a matter of adjusting the front brackets to place the mower on the B-C or CA.
As said above the CA #5 has the two steel cable pulleys for the drive.
Seems like you have gotten it right.
Good Luck!
Bill Long

Posted By: Larry Miller
Date Posted: 19 Oct 2011 at 5:13pm

I have a two belt Number 5 that was on a B for sale. All the mounting hardware is there and mower does not have much wear on it. I have a manual but would have it go with the mower. Can send pix w your email address. $200 ?? Located in NW Illinois.

-------------
I used to be young and stupid, now I am not young anymore.

Posted By: Tim-tn
Date Posted: 20 Oct 2011 at 10:04am

Larry sent you a PM, thanks.....