Farm Equipment - D-19 info

Print Page | Close Window

D-19 info

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39204
Printed Date: 18 Sep 2025 at 2:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-19 info

Posted By: tomstile
Subject: D-19 info
Date Posted: 19 Oct 2011 at 10:19am

Hello to All.

I just bought a D-19 gas. Runs good but has blown exhaust gaskets and needs a good cleaning. I pulled the manifold off today and see that on a couple of the exhaust ports, the surface is lightly pitted. Should I have it resurfaced or will the gaskets take care of it. Looks like about .010" would take care of it. If I need to do this I will have the head redone too, since it is already off. uploads/6015/030.JPG - uploads/6015/030.JPG

Where is a good source for the exhaust gaskets? Also a shop manual for a D-19.

Thanks for the info.

Replies:

Posted By: Lonn
Date Posted: 19 Oct 2011 at 10:22am

Resurface and then retorque it after it runs up to operating temp then check again after a few hours of use.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot