Print Page | Close Window

D15 head gasket

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39197
Printed Date: 15 Nov 2024 at 7:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D15 head gasket
Posted By: wf32
Subject: D15 head gasket
Date Posted: 19 Oct 2011 at 8:25am
A freind is rebuiling a D15 the head gasket that was shipped didnt have any fire rings in it. Called three different vendors all had same gasket without fire rings. So gasket installed ran 1 hr started missing burnt out head gasket between cylinders. Called vendor back cant get any other gasket from them. Finally found gasket with fire rings and installed know ok. Any one else have this problem
Phil



Replies:
Posted By: Burgie
Date Posted: 19 Oct 2011 at 8:28am
Fell Pro has fire rings. I put one on the little pink puller and it is good.

-------------
"Burgie"


Posted By: Tracy Martin TN
Date Posted: 19 Oct 2011 at 8:29am
Very common with the 160 engine. Buy the Fel-Pro with fire rings. It will stop the problem with proper installation and torque. HTH Tracy Martin


Posted By: wf32
Date Posted: 19 Oct 2011 at 8:46am
Thanks  guys the gasket is a Felpro thats in it now
Phil



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net