Print Page | Close Window

Wd45 hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=38231
Printed Date: 20 Oct 2025 at 12:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Wd45 hydraulics
Posted By: alc609
Subject: Wd45 hydraulics
Date Posted: 01 Oct 2011 at 9:02pm
Is it possible to put a remote for a dual action cylinder on a wd45? If so how? Or where could I find a pic or drawing of the setup?



Replies:
Posted By: alc609
Date Posted: 02 Oct 2011 at 2:59am
Surely somebody knows


Posted By: Teddy (punchie)
Date Posted: 02 Oct 2011 at 10:41am
I'm sure someone has more information but I would say any pressure  1 in control 2 out to the cylinder, flow is a one thing with the WD's there system is for pressure and low volume.  Flow back into the cap for the checking or filling.  Or maybe there is a way to drill out the cover behind under the starter for a return, maybe there a place already for return.


-------------
Ac D-19, a Number of WD's, One WD45, Two 444 balers, Ac plows and etc.


Posted By: alc609
Date Posted: 02 Oct 2011 at 2:50pm
I done a search and sent a guy a message for some pics that done it somewhat that way on a 17


Posted By: CTuckerNWIL
Date Posted: 02 Oct 2011 at 4:11pm
Buy a valve like used on a log splitter, connect to your present remote line and run a return line to a tee in place of the drain plug. Bottom of the tee would get the plug, side would get return line. You can also add a filter housing and filter on the return line.To make it work, you have to have the original hydra lever in the up position.


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: alc609
Date Posted: 02 Oct 2011 at 6:10pm
I don't think it has a remote at all, just the lines going to lift cylinders. Can I still make it work?


Posted By: CTuckerNWIL
Date Posted: 02 Oct 2011 at 8:06pm
If there is no line there, follow the lift arm lines back to the AC valve and pull a plug out of the original valve. Hook your pressure in side of the new valve to one of those plugged holes. You lift arms will go up first and once they are up the 2 way addition will work.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: BobHnwO
Date Posted: 03 Oct 2011 at 2:37pm
Alc 609 sent you a PM.

-------------
Why do today what you can put off til tomorrow.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net