Construction and other equipment

Print Page | Close Window

Hydraulic testing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=35731
Printed Date: 25 Jun 2025 at 3:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hydraulic testing

Posted By: Freighttrain
Subject: Hydraulic testing
Date Posted: 19 Aug 2011 at 12:31am

How much pressure should the Pump on a I600 make?I am gonna buy a gauge and check the pressure at the pump and down stream from the pump till I find where I have a problem.Don't want to get a gauge that is just going to blow out.

Replies:

Posted By: Coke-in-MN
Date Posted: 19 Aug 2011 at 1:13am

I would say in the 3,000 to 5,000 PSI range /should be in 2,300 + output if good but need some room for if's.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Freighttrain
Date Posted: 19 Aug 2011 at 1:19am

Thanks.Hope I find good pressure......My wallet really don't want to replace or rebuild a pump.