Farm Equipment - Can somebody get me part numbers for an Allis D14?

Print Page | Close Window

Can somebody get me part numbers for an Allis D14?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=34827
Printed Date: 29 Aug 2025 at 7:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Can somebody get me part numbers for an Allis D14?

Posted By: CarsonD14
Subject: Can somebody get me part numbers for an Allis D14?
Date Posted: 01 Aug 2011 at 2:48pm

Hey there,

My bearing went out on my front right wheel. I found an exploded view of the bearings, but I really need part numbers to be able to get the right one. I would like the part numbers for the following parts on a D14 with wide front serial number 9108 (the parts are in order as they appear in the manual I have, starting from the outside and working in toward the spindle):

3. Bearing cone

4. Bearing cup

5. Wheel Hub

6. Bearing cup

7. Bearing cone

8. Seal retainer

9. Felt seal

Also, if anyone has any tips or pitfalls to avoid when I get to puttin' this thing back together, I'd appreciate hearing them! Thanks!

Replies:

Posted By: CTuckerNWIL
Date Posted: 01 Aug 2011 at 2:58pm

Take the old bearings to your local bearing supply store, Motion Industries etc. They can match you up with new. I don't know if that felt seal is available anymore, many aren't. The hub I have no Idea about unless AGCO has one.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Charlie175
Date Posted: 01 Aug 2011 at 3:00pm

go to AGCOCORP.com, parts and view as a guest. Search for D14 and then the part you need. The part numbers are all online.

The hub you will need to source from a used dealer or other type service

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: CarsonD14
Date Posted: 01 Aug 2011 at 3:03pm

C Tucker,

Thanks, I'll try that. I don't really think I'll replace the hub, but I did find one on a parts site, and thought that it might be cheaper to replace the whole thing.

Posted By: GregLawlerMinn
Date Posted: 01 Aug 2011 at 3:16pm

There are after market sets available on eBay; search "Allis wheel bearing". one found is below:

http://cgi.ebay.com/New-Allis-Chalmers-WHEEL-BEARING-KIT-D10-D12-D14-WD-D17-/380289245124?pt=LH_DefaultDomain_0&hash=item588b015fc4 - http://cgi.ebay.com/New-Allis-Chalmers-WHEEL-BEARING-KIT-D10-D12-D14-WD-D17-/380289245124?pt=LH_DefaultDomain_0&hash=item588b015fc4

There are others available also.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: CarsonD14
Date Posted: 01 Aug 2011 at 3:35pm

Hey Charlie,

Thanks so much for the parts website, I got all the numbers I need, and now it's just on to finding the parts! If it helps anyone else, here's the direct address to the site, so all you have to do is type your model and select AGCO Allis for the brand:

http://www.agcopartsbooks.com/PARTSBOOKSN/Viewer/ - http://www.agcopartsbooks.com/PARTSBOOKSN/Viewer/

Thanks again!

Carson