Farm Equipment - WD water manifold

Print Page | Close Window

WD water manifold

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=33912
Printed Date: 23 Aug 2025 at 5:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD water manifold

Posted By: Jordan(OH)
Subject: WD water manifold
Date Posted: 15 Jul 2011 at 7:33am

My water manifold on WD is cracked. Can I replace it with a D17 style?

Replies:

Posted By: Steve M C/IL
Date Posted: 15 Jul 2011 at 8:46am

My WD has the 2-port manifold.45/17's just use front hole.Don't know why you couldn't.Water neck might be a little different angle?

Posted By: Orange Blood
Date Posted: 15 Jul 2011 at 10:21am

I think they will fit, my only concern would be to leave out the thermostat on the D17 manfold, and I don't know about hot spots in the head, since the GPM of the old WD pump is probably not that of the D17 pump. But without the thermostat, I am thinking you will be fine. If you are not running heavy loads on it you will be fine, but if you are I would be concerned about the back two holes getting warmer than the front two, since without the extra GPM, there is really no reason for the water to circulate back there. somebody else will chime in, to tell you I am over cautious, or just blast me, I am sure!! :-)

-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7

Posted By: Jordan(OH)
Date Posted: 19 Jul 2011 at 6:40am

bump