Farm Equipment - WD45 Width

Print Page | Close Window

WD45 Width

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=32403
Printed Date: 05 Aug 2025 at 1:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 Width

Posted By: Charlie175
Subject: WD45 Width
Date Posted: 17 Jun 2011 at 4:30pm

What was the min./max width of the tractor at the rear wheels?

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Replies:

Posted By: Jeff(WD45-SATX-TN)
Date Posted: 17 Jun 2011 at 4:43pm

Mine had 12.4x28 tires. All the way in I measured 74", that is actaully at the wheel center as it is the widest point with the tires spun all the way in. When all the way out I measured 89". Not 100% sure on the widest. That was where mine where when I started trying to turn the wheels in. They appeared to be at the end of their travel, or the widest point.

Hope that helps.

Jeff

-------------
1954 WD45 NF "Iron Tater"

Posted By: Charlie175
Date Posted: 17 Jun 2011 at 7:14pm

thank you. Making sure it would fit on a 77" wide trailer

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: Dakota Dave
Date Posted: 17 Jun 2011 at 8:30pm

Rear tread width is 56 to 90 inches. thats center to cented. for out side you need to add the width of a tire. if you have 14.9 thats 72 inches at inside stops. fist stop on each wheel will be 76". I went out and mesured mine it matches that.

Posted By: bluebanshee
Date Posted: 17 Jun 2011 at 10:24pm

I think thats what our deck between wheels trailer is. WD we got recently was partly spun out so we had to take the fenders off to get it on the trailer. I know the 45 with them spun in fits with at least 6 inches. Fully spun out I was thinking its just over 8 feet wide. But I could be wrong on that.