Construction and other equipment

Print Page | Close Window

HD^G Loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=32230
Printed Date: 16 Jun 2024 at 9:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD^G Loader

Posted By: jnielson
Subject: HD^G Loader
Date Posted: 14 Jun 2011 at 2:39pm

I just bought a HD6G and am looking for Truck rollers have 2 that are worn into

Also I am working on getting this Machine Running Replaced all the fuel filters Blew the Lines out and have the fuel system reprimed to the Pump but No fuel out of the pump that I can tell My brother is going to be here tonight I will get his help but does anyone else have any idea's the Machince will start and run on either

This Machince sat for at least 5+ years I think the injector Pump is a Bosch

Thanks

Replies:

Posted By: jnielson
Date Posted: 17 Jun 2011 at 8:33am

Update Found a stuck fuel shut off vale in Injector free and know the machince is running Very cold Blooded I do a a fuel leak on the Manafold Injector Tube and am know looking for a source to get the rubber O Ring This is causing fuel leak off and once that is fixed I hope it will start easier

Posted By: Coke-in-MN
Date Posted: 17 Jun 2011 at 9:54am

HD5 and HD6 rollers, sprockets, idelers and such undercarrage are all the same size as is the rear housig.

Track is the same pitch , just the length in links differs.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: jnielson
Date Posted: 22 Nov 2011 at 11:06pm

Thanks Coke my HD6 is down again looks like the hot summer took the seal out in the injection pump pulled the dip stick and i have desial fuel in the oil

now looking for a overhaul manuel before i pull the pump so i can have everything right before I pull the pump