Farm Equipment - 8000 Series aftermarket tach sensor

Print Page | Close Window

8000 Series aftermarket tach sensor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=32225
Printed Date: 10 Apr 2025 at 12:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8000 Series aftermarket tach sensor

Posted By: KT
Subject: 8000 Series aftermarket tach sensor
Date Posted: 14 Jun 2011 at 12:20pm

It's been a few years but someone referred me to a company in Michigan that had tach sensors that would work for my 8030 and 8050 tractors. Anybody remember the name of the company?

Replies:

Posted By: jb from md
Date Posted: 14 Jun 2011 at 8:19pm

I used an isspro sensor on my 8050 and it works fine .Its a generic magnetic sensor, the isspro part # is R8938 it is 2 wire , 2 inch long with 3/4 X 16 thread pitch and its $69. Any diesel repair shop should be able to get it for you or go to isspro.com ,here it is, hope this helps you ....Jb http://www.isspro.com/search.php - http://www.isspro.com/search.php

-------------
8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal.