Allis G Sickle Bar Mower Dimensions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31666
Printed Date: 24 Jun 2025 at 10:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis G Sickle Bar Mower Dimensions
Posted By: Scott(GA)
Subject: Allis G Sickle Bar Mower Dimensions
Date Posted: 02 Jun 2011 at 2:30pm
|
I'm getting ready to pick up a Model G that I put money down on about 3 months ago. The original owner of the G has somehow acquired a Sickle Bar mower and has added this into the deal for a small additional sum.
I hadn't planned on this so transportation starts to get more interesting...
Anybody have some values for weight & floor space dimensions for a G Sickle Bar Mower?
I've also asked the gentleman for an estimate of these same values.
Scott
|
Replies:
Posted By: Dusty MI
Date Posted: 02 Jun 2011 at 7:48pm
|
4' x 5'6" about 2' of that 5' x 6" is a 2" x 2" square tube that hooks to the draw bar bail. wild guess on weight 125 pounds. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: JoeM(GA)
Date Posted: 02 Jun 2011 at 9:44pm
|
Scott, Dusty is right on it, even not mounted it should fit under the arch and let the bar point back under the engine
------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: Scott(GA)
Date Posted: 02 Jun 2011 at 9:50pm
|
Dusty, Thanks for the dimensions & weight. That helps a lot!Best regards,
Scott
|
Posted By: Scott(GA)
Date Posted: 02 Jun 2011 at 10:01pm
|
Joe,
...and now the rest of the story. The G already has a belly mower mounted on it.
There's actually 2 Sickle Bar Mowers - the owner stated that one of them would mostly be for parts. I haven't seen them but:
1. I was already traveling to get the tractor.
2. The price was low enough that I was confident that it would be OK.
I'm wondering if it would be possible to arrange the mowers in the back of my pickup so that they would "dovetail" together. The mowers are kind of L shaped so I'm wondering if there's room to do something like L7 with the mowers. I've got an 8-foot bed on my truck. I'm not sure that I can get the tractor/belly mower and one sickle bar to fit on the trailer.
Picture of tractor/belly mower & then picture of trailer follows.
Best regards,
Scott
  |