d17d dipstick
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31630
Printed Date: 07 Sep 2025 at 3:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: d17d dipstick
Posted By: NICKMI
Subject: d17d dipstick
Date Posted: 01 Jun 2011 at 6:53pm
|
I recently baught a series 1 d17 diesel that was missing a dipstick for the motor oil and was wondering if maybe they used the same one from the wd 45 or other like tractors any help would be appreciated thanks NICKMI
|
Replies:
Posted By: Auntwayne
Date Posted: 01 Jun 2011 at 8:47pm
| Personally, I would be looking for a dipstick that fit my Series 1 D17 Diesel !!! |
Posted By: DSeries4
Date Posted: 01 Jun 2011 at 9:22pm
|
Not all dipsticks are the same. I would definitely get one that was made for that tractor. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Tedin NE-OH
Date Posted: 01 Jun 2011 at 9:26pm
| Can't be that expensive, contact your AGCO dealer |
Posted By: NICKMI
Date Posted: 01 Jun 2011 at 9:36pm
|
I was just wondering if one from another allis tractor would work and be the correct one for the tractor all the junkers I see in the salvage yards are all gassers not diesels if anybody has one theyd sell that whould help to thanks NICKMI
|
Posted By: Dans 7080
Date Posted: 01 Jun 2011 at 11:49pm
| Ted, I lost one in my 7040 a few years ago, went to Agco ..... $60 for it.... got a small block Chevy dipstick measured off another tractor (7000 series with 426ci) cut and marked it for $8 |
Posted By: Chris/CT
Date Posted: 02 Jun 2011 at 6:42am
| I have a NOS one for a WD45 if needed/or if it will work. |
Posted By: Stan IL&TN
Date Posted: 02 Jun 2011 at 7:18am
|
Maybe someone on here who has a series 1 diesel can measure theirs and report back on the length? ------------- 1957 WD45 dad's first AC 1968 one-seventy 1956 F40 Ferguson |
Posted By: Brian Jasper co. Ia
Date Posted: 02 Jun 2011 at 1:12pm
|
If you can wait until tonight, I'll measure mine. On lunch at work now... ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: Brian Jasper co. Ia
Date Posted: 02 Jun 2011 at 1:13pm
|
I'd have to look in the manual to be sure, but I think it's 8qts that it holds. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: Gordy
Date Posted: 02 Jun 2011 at 1:42pm
|
I checked my d17d and my WD45G and the dipsticks seem to nearly identical 9-1/2 inches from the stop to end. |
Posted By: jon
Date Posted: 02 Jun 2011 at 9:27pm
|
If I did this right you should see two photos of two different dipsticks. The one that says full (the bottom one) is from a WD and the other is from a D17D. One of the pics works, the other i still in a link format. http://www.allischalmers.com/new/forum/uploads/2378/IMG_6070.jpg - uploads/2378/IMG_6070.jpg
 |
Posted By: Brian Jasper co. Ia
Date Posted: 02 Jun 2011 at 9:44pm
|
I measured my series 1 diesel dipstick. It's 9 3/4 inches to the top of the inside of the cap from the tip. The add line is 1 9/16 from the bottom and the full line is 2 3/16. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |