Allis Chalmers C Help!!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31626
Printed Date: 10 Mar 2025 at 9:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers C Help!!
Posted By: Blake_AllisMan
Subject: Allis Chalmers C Help!!
Date Posted: 01 Jun 2011 at 4:59pm
I am disassembling the wheels on my Allis Chalmers C and the wedges that hold the hub and the rim together have two eccentric bolts on each pair of wheels. My question is where would a guy get eccentric bolts that fit into the wedge castings and where could a guy get some wedge castings that have the eccentric holes? Thank You very much for any information! Blake
-------------
1941 C
1952 IB
1947 C
1955 WD45 SFW
1956 WD45 Diesel
1977 5020 4WD Serial Number 1
|
Replies:
Posted By: JimD
Date Posted: 01 Jun 2011 at 5:20pm
|
Your tractor should on ly have 2 per wheel. They go next to each other to provide both directions of spread. We have used part available, but I"m not sure you need the,.
JimD
-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.
We have new and used parts. 877-378-6543
|
Posted By: Dakota Dave
Date Posted: 01 Jun 2011 at 6:18pm
|
When you re assemble you need to make sure the wedge that fitts in the drive lugs can not have an eccentric on it or you will be picking the tractor back off the ground when it falls off.
|
Posted By: Ted J
Date Posted: 01 Jun 2011 at 6:40pm
Blake, you have a PM. The eccentric wedge will not fit between the drive lugs. It is wider than that. Only the regular or plain wedge will fit in it.
-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
Posted By: ron nca
Date Posted: 01 Jun 2011 at 6:49pm
|
Black try Tony Carbaugh I think he has them
|
|