Farm Equipment - Where Mount Hydraulic Valve?

Print Page | Close Window

Where Mount Hydraulic Valve?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31528
Printed Date: 10 Mar 2025 at 8:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Where Mount Hydraulic Valve?

Posted By: MBWisc
Subject: Where Mount Hydraulic Valve?
Date Posted: 30 May 2011 at 6:39pm

A couple of years ago I added a ball valve ahead of my WD rear hydraulic coupler to shut off the fluid to my front end loader. That valve is situated under the seat. It worked so well I bought one for the control arms so I can use the loader with lift arms up attached to a blade. I know others have done this. Where did you mount the valve? Did you run hydraulic hose or steel line to and from the valve?

After I sight the valve I can measure for line to put it all back together.

All help is sincerely appreciated!

Replies:

Posted By: KenBWisc
Date Posted: 31 May 2011 at 8:27am

Bump.

-------------
'34 WC #629, '49 G, '49 B, '49 WD, '62 D-19, '38 All Crop 60 and still hunting!

Posted By: Nathan (SD)
Date Posted: 31 May 2011 at 10:09am

Mount it up by the pump where the rear cylinders hose attaches to the pump.

Posted By: CTuckerNWIL
Date Posted: 31 May 2011 at 11:10am

I mounted a 3 way valve on top of the hydraulic pump just because it made the plumbing changes easier. I have yet to add an extension so I can work it from the seat. I can push it forward with my foot but need to stand up and bend, to reach it to pull it back. It runs the freeman loader in the forward position, the remote connection is in the middle and the lift arms is the rear position. It is really nice for snow removal to have the blade and loader on at the same time and be able to use both.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: mdm1
Date Posted: 31 May 2011 at 6:41pm

I mounted mine for my AD-45 on the right fender. Super easy to get to. Maybe takes more hose but works great for me.

-------------
Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK!