AC H3 crawler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31514
Printed Date: 01 Apr 2025 at 4:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC H3 crawler
Posted By: NNAATZ
Subject: AC H3 crawler
Date Posted: 30 May 2011 at 9:57am
just bought an H3 loader, im looking for sprokets and track chain in usable wear, and possiblity of an PTO to add, will parts from a D15 work? got it home, takin out stumps.  |
Replies:
Posted By: Coke-in-MN
Date Posted: 30 May 2011 at 11:46am
|
can try Crawler Welding in Mankato MN to see if they can line anything up for you . They were a good sponsor in the trade orginization I belonged to .
Northern Tractor in Osseo MN might also have a line on some things.
Another is Thill Track and Tractor in Eau Clare WI. ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Kipn
Date Posted: 31 May 2011 at 11:00am
|
D15 parts will work for the tractor, motor, torque tube, tranny, not finals. Come to think, not to sure on the tranny as dozers are usually geared lower but that could be done in the rear end. Don't know where to get tracks. ------------- 1961 H3 |
Posted By: CTuckerNWIL
Date Posted: 31 May 2011 at 11:43am
|
Wow, that is what I should have on the top of my want list. I have a neighbor that needs some old foundations cleaned up and could put her right to work. My Dad's cousin had one setting in his shed for years. When I found out about it I went over and tinkered with it and got it running. About 2 months later he sold everything on an auction a that rig brought about 3 times what it was worth. Track adjusters were frozen and all the way out, hydraulics was full of air and had several leaks. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: chevytaHOE5674
Date Posted: 31 May 2011 at 3:08pm
| Minnpar has new track parts available. But get your checkbook out. haha |
Posted By: ac_sd
Date Posted: 06 Jun 2011 at 3:16pm
| I have a set of H-3 tracks with street pads, bad news is, I'm in San Diego.... Bob S. |