Print Page | Close Window

pto gear replacement on wd45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31427
Printed Date: 10 Mar 2025 at 3:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: pto gear replacement on wd45
Posted By: brettIA
Subject: pto gear replacement on wd45
Date Posted: 28 May 2011 at 3:44pm
hey guys just wanted to thank you for the advice on replacing the gear ! everything went great ! also found that the gasket on the hyd pump was messed up from the factory so maybe that seep of oil will be gone . I was suprised on how little dirt & debrie was in the tranny after all these years with no filter ! note too self replace that shear bolt in the brush mower with a softer one!!!!!!!!!!!! NO better site on the web you are all great!!!!!!!!!!!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net