A.S.A.E. Drawbar
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31311
Printed Date: 10 Mar 2025 at 2:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: A.S.A.E. Drawbar
Posted By: Blake_AllisMan
Subject: A.S.A.E. Drawbar
Date Posted: 25 May 2011 at 1:50pm
|
Hey guys I was just wondering how common the A.S.A.E. drawbar was? I have one on my C and I was told they were kinda uncommon. Any information would be helpful. Thanks Blake ------------- 1941 C 1952 IB 1947 C 1955 WD45 SFW 1956 WD45 Diesel 1977 5020 4WD Serial Number 1 |
Replies:
Posted By: Dakota Dave
Date Posted: 25 May 2011 at 3:39pm
| they werenessqacary if you used any standard pull eguipment. I've seen alota of them. many have been butchered or are hanging on a barn wall. I had two of the triangle ones and an extra swining bar that I couldn't even give away they went for scrap a while ago. |
Posted By: CTuckerNWIL
Date Posted: 25 May 2011 at 6:30pm
|
Blake, can you post some pictures of what you have. I found a triangle piece that looks like it should be mounted on the front of my CA so I can push wagons around. I don't know where it came form or what it really is. Maybe I should keep it for my B and find dimensions for the support brackets that bolt to the seat frame.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Charlie175
Date Posted: 25 May 2011 at 7:07pm
ASAE ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: CTuckerNWIL
Date Posted: 25 May 2011 at 7:16pm
|
Thanks Charlie, that looks like what I have. Now all I need is the strap size and dimensions for my 38B that go where your turn buckles are.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: norm[ind]
Date Posted: 25 May 2011 at 7:37pm
| ASAE DRAWBAR WAS MEASURED FROM END OF PTO SHAFT TO PIN HITCH FOR PTO USES SO ALL MAKES WAS STANDARD [ALL COLORS] THAT IS WHAT ASAE STANDS FOR WAS STARTED BEFORE LOTS OF YOU WERE BORN BEFORE1940 |
Posted By: CTuckerNWIL
Date Posted: 26 May 2011 at 10:11pm
I dug mine out today and it is different. It is 9 inches long and 6 inches wide and the 3 mounting holes are not in an arch or straight line. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: GA-IN-TEXAS
Date Posted: 26 May 2011 at 10:29pm
| INTERNATIONAL MADE ONE SIMILIAR TO THE A-C MAY BE WHAT YOU HAVE? |