OK guys D15 question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30971
Printed Date: 08 Mar 2025 at 11:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: OK guys D15 question
Posted By: captaindana
Subject: OK guys D15 question
Date Posted: 18 May 2011 at 6:38pm
|
I was told by an expert in order to get my gen and vr on the same page to jump momentarily the bat and gen terminals to get a spark, doing this with the key on but engine not running. Fair enough. But this country boy can't find a gen terminal...just field, bat and arm on the vr. So can I jump from the hot side of the battery to...what? I know it's a dumb question but hey, what can I say. Thanks, Dana PS on the gennie I have field and arm.
|
Replies:
Posted By: BobHnwO
Date Posted: 19 May 2011 at 8:34am
Can't help but put up top,to get some replies!!
-------------
Why do today what you can put off til tomorrow.
|
Posted By: captaindana
Date Posted: 19 May 2011 at 9:11am
|
I'm thinking my question is...is Gen same as Arm OR Fld?
|
Posted By: Coke-in-MN
Date Posted: 19 May 2011 at 10:30am
The method that has worked for me over the years takes about five seconds. Connect a length of 14-Gauge (or similar) wire to the 'A' terminal of the Control Box (voltage regulator). Quickly swipe the opposite end of the wire two or three times across the 'F' terminal on the back of the generator. The 'F' terminal is the smaller of the two. There should be a small spark.
That's it, you're done. Just be sure you do not leave the wire in contact with the generator for more than a split second, and do avoid touching it to anything else.
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: Sitesstables
Date Posted: 19 May 2011 at 10:36am
Arm is for the Gen do not use the field.. You can also search Polorizing your regulator.
-------------
1965 D17 Series IV
|
Posted By: Steve in NJ
Date Posted: 19 May 2011 at 10:58am
NEVER jump to the field side of the VR or Gennie. Easy way to to damage to both. Arm' goes to the "A" (Armature) post of the Gennie. Field to "F" post on the Gennie. Jump ARM to BAT. You're now Polarized..
Steve@B&B
|
|