Izzere a name for these things?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30809
Printed Date: 06 Mar 2025 at 7:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Izzere a name for these things?
Posted By: DaveKamp
Subject: Izzere a name for these things?
Date Posted: 15 May 2011 at 9:12pm
Okay, so I gotta re-mount a drawbar on a '39 B, and I know there's a metal tab with a pin that goes here: Tell me what they're actually called, so when I go lookin' for a couple, people know what I'm talkin' about! |
Replies:
Posted By: GBACBFan
Date Posted: 15 May 2011 at 9:22pm
|
The parts book calls them clamp assemblies, P/N 225770. ------------- "The trouble with quotes on the Internet is that you can never know if they are genuine." - Mark Twain |
Posted By: MNLonnie
Date Posted: 15 May 2011 at 9:24pm
|
Here are some on e-bay, there are new ones for $35 each also, someone probably has some lying around.
http://cgi.ebay.com/Allis-Chalmers-draw-clamps-B-C-models-/250820579653?pt=BI_Books_Manuals&hash=item3a66125145 - http://cgi.ebay.com/Allis-Chalmers-draw-clamps-B-C-models-/250820579653?pt=BI_Books_Manuals&hash=item3a66125145 ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: Dave(inMA)
Date Posted: 15 May 2011 at 9:24pm
|
I kinda like "metal tab with a pin" myself....whole lot more descriptive! Guess the words might depend on whom you are talking to. ------------- WC, CA, D14, WD45 |
Posted By: DREAM
Date Posted: 15 May 2011 at 9:34pm
|
I made one for my C. It had an Athens drawbar on it when I got it. I got a standard drawbar off of a parts tractor, but one of the clamps was stuck in the final so bad it wouldn't come out, and I put the blue tool to it. I just measured the other one, got a piece of flat bar stock that size, drilled two holes, cut a piece of round stock the right size, and welded it into the flat stock. Little orange paint, and noone would ever know. ------------- I didn't do it! It was a short, fat, tall, skinny guy that looked like me! |
Posted By: Eldon (WA)
Date Posted: 15 May 2011 at 9:54pm
|
They come in two sizes...later ones have a bigger bolt? I think. ------------- ALLIS EXPRESS! This year: |
Posted By: GlenninPA
Date Posted: 16 May 2011 at 6:53am
|
Yes Eldon, you are correct. Early = 1/2 inch, later= 5/8th inch ------------- Good judgment comes from experience. Experience comes from bad judgment. From listening comes wisdom and from speaking comes repentance. Wise men learn more from fools than fools from the wise. |
Posted By: CTuckerNWIL
Date Posted: 16 May 2011 at 10:05am
|
Pretty easy to make like like Dream says. Measure the distance between the hole centers on the final, cut a piece of flat stock and drill 2 holes in the right place. Cut a piece of round stock and weld in the big hole.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |