Farm Equipment - Suprise '34 WC

Print Page | Close Window

Suprise '34 WC

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30794
Printed Date: 06 Mar 2025 at 5:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Suprise '34 WC

Posted By: KenBWisc
Subject: Suprise '34 WC
Date Posted: 15 May 2011 at 5:38pm

Though it was time to treat the '34 (#629) to an oil change. Warmed it up well mowing lawn, drained the oil and, when I went to change the oil filter I found no pipe in the filter base!
Is there any reason I can't make one out of 1/4" OD X 4.5" pipe? Is the ID diameter critical?

-------------
'34 WC #629, '49 G, '49 B, '49 WD, '62 D-19, '38 All Crop 60 and still hunting!

Replies:

Posted By: Kraig (WI)
Date Posted: 15 May 2011 at 6:10pm

You can make one. But it would be easy to find a replacement from a junked tractor too.

Kraig

-------------
7010,D17D,WD45,WD,WC,WC,B,
Gleaner K,60,66,72

Posted By: Thad in AR.
Date Posted: 15 May 2011 at 6:18pm

Did you make sure it's not stuck in the filter?

Posted By: norm[ind]
Date Posted: 15 May 2011 at 6:23pm

do not push it to far --no oil pressure will happen

Posted By: Tony.Or
Date Posted: 15 May 2011 at 9:08pm

We stock new oil tubes . Tony

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com