Farm Equipment - ? 4-14 plowing, 4th bottom not going deep enough??

Print Page | Close Window

? 4-14 plowing, 4th bottom not going deep enough??

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30639
Printed Date: 06 Mar 2025 at 1:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: ? 4-14 plowing, 4th bottom not going deep enough??

Posted By: Teddy (punchie)
Subject: ? 4-14 plowing, 4th bottom not going deep enough??
Date Posted: 12 May 2011 at 5:47pm

I'm having trouble getting the 4th bottom into the ground, only going about 4-5 inches. This is it just the first pass; do I have to wait for the second pass? Is the snap coupler hitch too long? Do I need to readjust one of the adjustments? If so which ones? landside heel, snap coupler right side, or the center adjustment. Thanks!!

Sorry for the post in the classifields.

-------------
Ac D-19, a Number of WD's, One WD45, Two 444 balers, Ac plows and etc.

Replies:

Posted By: Gerald J.
Date Posted: 12 May 2011 at 6:34pm

Lengthen the center if there's no gauge wheel.

Adjustments, especially tilt, are different the second pass because of the tractor wheel in the furrow.

Gerald J.

Posted By: JoeO(CMO)
Date Posted: 12 May 2011 at 6:34pm

do a second pass before you make any adjustments

-------------