Farm Equipment - D14 Power Director fluid level check

Print Page | Close Window

D14 Power Director fluid level check

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30623
Printed Date: 06 Mar 2025 at 1:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 Power Director fluid level check

Posted By: jtheise4
Subject: D14 Power Director fluid level check
Date Posted: 12 May 2011 at 8:13am

On the D14, the power director dip stick is a bolt. What is the proper way to check the fluid level? Should I be screwing the bolt into the seated position or checking the fluid level with the bolt threads just touching the housing? Thanks.

Replies:

Posted By: Chalmersbob
Date Posted: 12 May 2011 at 10:05pm

threaded all the way in. When you remove the bolt (plug) you can read the level on the dip stick. Bob

Posted By: jtheise4
Date Posted: 13 May 2011 at 6:52am

Chalmersbob wrote:

threaded all the way in. When you remove the bolt (plug) you can read the level on the dip stick. Bob

Thanks. I guessed correctly then.

-------------
1958 D14