Allis G hydraulic pump
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30344
Printed Date: 06 Mar 2025 at 11:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis G hydraulic pump
Posted By: Charles (KY)
Subject: Allis G hydraulic pump
Date Posted: 06 May 2011 at 5:57pm
| I am trying to find a bearing either new or used or a picture of one for a Allis G hydraulic pump. The bearing number is 800735 and is item #4 in the parts diagram. Any help would be appreciated. |
Replies:
Posted By: Tedin NE-OH
Date Posted: 06 May 2011 at 6:08pm
| If you have the old one, read the part number off the bearing and go to a bearing distributor. Most of Allis Chalmers bearings were standard issue. |
Posted By: Tedin NE-OH
Date Posted: 06 May 2011 at 6:28pm
| Call Sandy Lake Implement 1-888-252-0656 |
Posted By: Charles (KY)
Date Posted: 06 May 2011 at 7:15pm
| Unfortunately this bearing was a Allis only bearing. The old bearing is not the correct bearing. Several of the bearing in the allis G hydraulic pump were Allis only bearings. Local bearing dealer cannot cross it over. Hopefully SandyLake can help tomorrow. |
Posted By: norm[ind]
Date Posted: 06 May 2011 at 7:20pm
| we have crossover to the bearings will check |
Posted By: wfmurray
Date Posted: 06 May 2011 at 8:22pm
| Take A caliper and measure i.d. and o.d. and width then check style . You can look it up on computer. I bought four bearings for trans mission for finish mower for 36 dollars including freight. Shop around .Most come from China anyway. |
Posted By: Tracy Martin TN
Date Posted: 06 May 2011 at 9:23pm
| Charles, I feel your pain. Been there done that. Tracy Martin |
Posted By: norm[ind]
Date Posted: 07 May 2011 at 4:59pm
|
it is a ndh bearing looked this morm all info. at shop puter at home 1-800-254-3116
will check availability wth a snap ring
|
Posted By: Scott(GA)
Date Posted: 08 May 2011 at 10:08am
|
I have an Allis-Chalmers Part Number Bearing Exchange List in the front of my A/C Master Parts List: AC Part Number - 800735 New Departure - 43303 or 43308 print is not good but I'm pretty sure it's 43303 Best regards, Scott
|
Posted By: norm[ind]
Date Posted: 09 May 2011 at 8:18pm
| we have a used one or can get a new one your choice a phone number would help for a quicker response 1-800-254-3116 for a reply over nite delivery if wanted we have crossover for all A-C bearings |
Posted By: RichinWis
Date Posted: 10 May 2011 at 9:05am
| Scott, The real question is ... Do you have the crossover for the bearing on the other end of the shaft? Number 800736. Thanks |
Posted By: Scott(GA)
Date Posted: 10 May 2011 at 9:34am
Well... The Bad News: The first problem is the lists are Bass-akwards. They are listed in groups - the groups are the individual bearing manufacturers. Then, under the manufacturer's group, they list the part in numerical order BY THE MANUFACTURER'S NUMBER. As a result, I have to scan through several pages of poor print with dimming eyes blah, blah, blah... The Good News: I haven't gone through the whole list but I have found one! Rollway W-919 Allis-Chalmers 800736 Best regards, Scott |
RichinWis wrote: