Farm Equipment - 160 three point control lever problem

Print Page | Close Window

160 three point control lever problem

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30332
Printed Date: 06 Mar 2025 at 3:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 160 three point control lever problem

Posted By: Fellenz
Subject: 160 three point control lever problem
Date Posted: 06 May 2011 at 9:53am

Hi,

I'm having a problem reattaching the three point control levers on my 160. I had removed the levers and the piece that holds them to get ready to paint the tractor, now the tractor is painted and I need to get them back on.

The problem I'm having is the splined shaft the traction booster lever attaches to has sprung out of the side of the tractor and obscured part of the splined shaft that the position control lever needs to attach to. I cannot get it to push back in so I'm unable to reattach the retaining clip and cannot attach the position control lever.

I have the I&T manual and will be looking through it for a solution but thought I would throw the question out to the forum first in case it's a simple but undocumented fix.

Thanks!

Erik