Farm Equipment - 190 xt front end

Print Page | Close Window

190 xt front end

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30307
Printed Date: 06 Mar 2025 at 4:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 xt front end

Posted By: steve(oh)
Subject: 190 xt front end
Date Posted: 05 May 2011 at 8:57pm

What is a complete front end worth for a 190xt? it has been braced up but who ever did it did a good job on it. Thanks steve

Replies:

Posted By: DSeries4
Date Posted: 05 May 2011 at 9:24pm

I think a lot of them have been braced up. Mine was too.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: DaveCinIN
Date Posted: 05 May 2011 at 11:13pm

Do you have a picture of the braced up front?

Posted By: JayIN
Date Posted: 06 May 2011 at 6:53am

Almost every one that I have seen has been repaired. It is rare to find one that has not.

-------------
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"

Posted By: Lonn
Date Posted: 06 May 2011 at 8:15am

3 out of the 4 190's on our place are not braced. The one that is I just welded a small gusset in the rear corners of the yoke. It looks factory and barely visible. they should have been built with the gusset from the start from the 180 thru the 200.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot