Farm Equipment - 912 Hydr Tiller Belt pattern

Print Page | Close Window

912 Hydr Tiller Belt pattern

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30277
Printed Date: 06 Mar 2025 at 6:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 912 Hydr Tiller Belt pattern

Posted By: john 1
Subject: 912 Hydr Tiller Belt pattern
Date Posted: 05 May 2011 at 3:39pm

Can anyone tell me or show me how the belt for a rear tiller on a 912 Hydro goes on?

Replies:

Posted By: 427435
Date Posted: 05 May 2011 at 4:25pm

Ask the question here or do a search on it: http://www.simpletractors.com/club2/forum.asp?FORUM_ID=7 - http://www.simpletractors.com/club2/forum.asp?FORUM_ID=7

-------------
Mark

B10 Allis, 917 Allis, 7116 Simplicity, 7790 Simplicity Diesel,
GTH-L Simplicity

Ignorance is curable-----stupidity is not.

Posted By: john 1
Date Posted: 05 May 2011 at 9:52pm

Thank-You!!!!

Posted By: 427435
Date Posted: 06 May 2011 at 10:26pm

I see someone gave you a link to a complete manual over there. It's a lot like this forum-----lots of good folks that will help if they have the info needed.

-------------
Mark

B10 Allis, 917 Allis, 7116 Simplicity, 7790 Simplicity Diesel,
GTH-L Simplicity

Ignorance is curable-----stupidity is not.

Posted By: john 1
Date Posted: 06 May 2011 at 11:30pm

When I click on the site he gave me I;m not finding anything?

Posted By: Chris/CT
Date Posted: 07 May 2011 at 7:34am

Does your machine have all the appropriate drive parts on rear lift assy? Assuming it does, along with appropriate pulley on BevGear Box shaft sticking out left side, belt runs up along left side to that pulley. Depending on what drive you have [ Hydro/Var] has a slight variation. Best to get a exploded view of those rear pulley's, etc, that mount to rear hitch bar, and sort it out. Can you post a picture of the tiller mounted to your machine from rear?

I see you have a Hyd. Unit. Simplicity/Agco has a "deflector" pulley that keeps that belt from rubbing on the Hyd Filter. Brenda@ SandyLake Implement has the kit, along with copy's of what you'll need. The belt will do some serious rubbing on that filter, I had almost worn a hole thru mine!

Posted By: 427435
Date Posted: 07 May 2011 at 10:24am

See if this link works: http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCyEN8bqM2rE3Cvh5kbp796Dq - http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCyEN8bqM2rE3Cvh5kbp796Dq

Go to page 6.

As pointed out above, if you have a hydrostatic unit, there's another idler pulley that mounts on the side of the tractor frame between the drive pulley and the hydrostatic filter. That moves the belt down just under the filter. My son bought a tiller that didn't include this pulley, but I made him one by bending some metal and mounting a pulley I bought at Fleet Farm.

PM me if you want a photo of this extra pulley and mount.

Actually, the pulley may raise the belt over the filter-----don't remember for sure.

-------------
Mark

B10 Allis, 917 Allis, 7116 Simplicity, 7790 Simplicity Diesel,
GTH-L Simplicity

Ignorance is curable-----stupidity is not.

Posted By: john 1
Date Posted: 07 May 2011 at 10:55pm

Thank You very much for the link and the manual. I really apprecitate it!!