allis chalmers 8550 for parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30239
Printed Date: 06 Mar 2025 at 10:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis chalmers 8550 for parts
Posted By: humphreysfarm
Subject: allis chalmers 8550 for parts
Date Posted: 04 May 2011 at 8:17pm
| hi i have a 1980 allis chalmers 8550 263 hp for parts. The tube came off the bottom of the oil pump and lost oil pressure as soon as the engine oil light came on i shut the engine off. We did pull the oil pan off an i did notice that one of the crank bearings were scored so i didnt go any further tearing it apart.If you are interested in parts you can contact me at 540 295 5055 my name is brandon and the tractor is located in fredericksburg virginia.my email is mailto:humphreysbrandon@gmail.com - humphreysbrandon@gmail.com i can send pictures if needed. thanks |
Replies:
Posted By: humphreysfarm
Date Posted: 05 May 2011 at 9:14am
|
Posted By: Jim Hancock
Date Posted: 05 May 2011 at 9:20am
| Saw a You Tube video the other night where someone put in a Detroit in one of these and it ran like a scalded cat. |
Posted By: Charlie175
Date Posted: 05 May 2011 at 2:43pm
|
Wesley, you need this! ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Calvin Schmidt
Date Posted: 05 May 2011 at 2:47pm
|
If anyone is looking for an engine for this beast, I have a 450 hp A-C 25000 MKII engine with 1079 hrs from a generator that will bolt in. ------------- Nothing is impossible if it is properly financed |
Posted By: humphreysfarm
Date Posted: 05 May 2011 at 8:44pm
| http://www.allischalmers.com/new/forum/uploads/4957/DSC02620.JPG - uploads http://www.allischalmers.com/new/forum/uploads/4957/DSC02618.JPG - uploads/4957/DSC02618.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02620.JPG - /4957/DSC02620.JPG |
Posted By: humphreysfarm
Date Posted: 05 May 2011 at 8:50pm
|
http://www.allischalmers.com/new/forum/uploads/4957/DSC02617.JPG - uploads/4957/DSC02617.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02618.JPG - uploads/4957/DSC02618.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02619.JPG - uploads/4957/DSC02619.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02621.JPG - uploads/4957/DSC02621.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02622.JPG - uploads/4957/DSC02622.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02623.JPG - uploads/4957/DSC02623.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02625.JPG - uploads/4957/DSC02625.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02627.JPG - uploads/4957/DSC02627.JPG |
Posted By: humphreysfarm
Date Posted: 05 May 2011 at 9:11pm
| i recently bought a used georator pump still it the box it runs the hydralic remotes and 3 point hitch i didnt get a chance to put it on but we also put shift cables for the high and low and the gear range and rebuilt the turn cylinders and the 3 point hitch cylinders. The tires on the machine look to me like they are about half tread but i measured the lugs they got about 3/4 tread.We just ran it in october to work up 80 acres the transmission shifted good and the two speed on the floor worked. The bolt come out of the oil releaf valve and lost oil pressure and spinned the crank bearings we only pulled the cap off of one we figured the rest are probably in the same shape.We never used the pto the shaft is twisted on it. If your interested just shoot me a offer i know most of yall that are interested shipping is a big part in moving this thing i can easliy load it for you thanks. |
Posted By: humphreysfarm
Date Posted: 06 May 2011 at 10:13am
|
http://www.allischalmers.com/new/forum/uploads/4957/DSC02688.JPG - uploads/4957/DSC02688.JPG http://www.allischalmers.com/new/forum/uploads/4957/DSC02687.JPG - uploads/4957/DSC02687.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02686.JPG - uploads/4957/DSC02686.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02685.JPG - uploads/4957/DSC02685.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02684.JPG - uploads/4957/DSC02684.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02683.JPG - uploads/4957/DSC02683.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02682.JPG - uploads/4957/DSC02682.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02681.JPG - uploads/4957/DSC02681.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02679.JPG - uploads/4957/DSC02679.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02678.JPG - uploads/4957/DSC02678.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02677.JPG - uploads/4957/DSC02677.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02675.JPG - uploads/4957/DSC02675.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02674.JPG - uploads/4957/DSC02674.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02673.JPG - uploads/4957/DSC02673.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02672.JPG - uploads/4957/DSC02672.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02671.JPG - uploads/4957/DSC02671.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02670.JPG - uploads/4957/DSC02670.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02669.JPG - uploads/4957/DSC02669.JPG
http://www.allischalmers.com/new/forum/uploads/4957/DSC02668.JPG - uploads/4957/DSC02668.JPG
|
Posted By: Orange Blood
Date Posted: 06 May 2011 at 5:29pm
|
I see your problem, it has nothing to do with the oil pump, rods or mains, it's that damn Deere key you have in the ignition. Replace that, and I be she runs another 15 years without a wrench to her.
:-) ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: humphreysfarm
Date Posted: 07 May 2011 at 8:57pm
|
For a update i have a sale pending on the engine everything from the fan to the clutch front axles and wheels and tires and the 3 point hitch quick attach. Im looking to sell the (these prices do not include shipping)
turn cylinders for $350 a piece
the georator pump that runs the output hydraulics and 3 point hitch for $300
the cab make offer if interested
the transmission $1000
the back set of wheels and tires (4)$1200
rear end make offer
the drive shaft that runs the rear end $200
radiator $300
the passenger side panel is bent it fell off and got ran over but i do still have itcould probably be staightened i will put up a picture soon. i would like to get rid of the left and right side together $150
the front grill $100
the top panel that wraps around the exhaust $100
|
Posted By: humphreysfarm
Date Posted: 11 May 2011 at 5:28am
|
the grill rear fenders the hood the turn cylinders the front lights with bracket under the grill and the drawal bar hitch are in a pending sale.
still looking to sell
the transmission
cab
radiator
rear wheels and tires
rear end
the 3 point hitch cylinders
3 point hitch arms
3 point hitch top link
georator pump
|