D15 Hydraulic Remote?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30219
Printed Date: 06 Mar 2025 at 3:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15 Hydraulic Remote?
Posted By: Smitchell
Subject: D15 Hydraulic Remote?
Date Posted: 04 May 2011 at 11:41am
|
Some one I know is in the process of rebuilding a D15 and I noticed something a little different than what I have. It has just one plug for a remote but 2 lines going into it. There is a valve at bottom of it. It apears to be factory as it is painted, but am not familiar with ths remote. I know that the piece of pipe is not factory but what about the rest? What is the purpose of 2 line and one outlet? I have inculded a picture. |
Replies:
Posted By: Chris/CT
Date Posted: 04 May 2011 at 12:50pm
| Looks like Fac. Transport Valve. It would aid in Raising/Lowering the tailwheel on a plow as you leave/enter furrows. |
Posted By: BIG MIKE
Date Posted: 04 May 2011 at 1:05pm
| Its factory mine has it but has a 3 spool control valve that works it.The spool valve has one single and 2 double action spool and a knob to adjust pressure for when you not using an AC clynder to lower pressure so you dont blow the lower pressure clynder. |
Posted By: Orange Blood
Date Posted: 04 May 2011 at 5:23pm
|
The reason it has two steel lines, is one is pressure one is return, there is also a hose that goes out of the bottom through the cast housing to the lift arm rams. ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: jtheise4
Date Posted: 04 May 2011 at 6:43pm
| I have something very similiar on my D14. Can the original be replaced with say a Prince control valve so it is a little more useful? |
Posted By: Chris/CT
Date Posted: 04 May 2011 at 6:51pm
| There was a few options for the D-15 which may work on the D-14. In parts book there are at least 4-6 pages of valves,hyd booster's, etc that were available to make it more useable, have not seen these options very often or at all for that matter. I do not know if the Prince CV would work. |
Posted By: jtheise4
Date Posted: 05 May 2011 at 8:03am
|
Chris/CT wrote:Posted By: RSponenberg
Date Posted: 05 May 2011 at 2:39pm
| I have the same valve on my one WD45,like said works great on a plow with a tail wheel.Also you can raise the plow and turn the knob to lock the tail wheel up for road transport. |
Posted By: Chris/CT
Date Posted: 05 May 2011 at 5:34pm
| AC/AGCO Parts book, towards the back of book, I was amazed at the optional stuff that was available for these tractors, some of these pieces are rare I'll bet. |
Posted By: Orange Blood
Date Posted: 05 May 2011 at 5:35pm
------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |