M Track-ter pull
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30213
Printed Date: 05 Mar 2025 at 10:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: M Track-ter pull
Posted By: allisrutledge
Subject: M Track-ter pull
Date Posted: 04 May 2011 at 8:07am
|
I just had to see what the little M would do with the dead weight. No one could come close in 6500 class. I guess I might have to keep it and I might even put on a little more fresh paint . Scott ------------- Allis Chalmers still exist in my mind and barns |
Replies:
Posted By: Jeff(WD45-SATX-TN)
Date Posted: 04 May 2011 at 8:30am
|
Nice M! ------------- 1954 WD45 NF "Iron Tater" |
Posted By: CTuckerNWIL
Date Posted: 04 May 2011 at 8:37am
|
Next thing you know, you'll see track layers coming out of the woodwork to pull a stone boat. Then we would all have to make sure we read the fliers right to tell if we are going to a tractor pull or a Track-ter pull. LOL
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Rfdeere
Date Posted: 04 May 2011 at 2:36pm
|
What pecentage did she pull ? Surely you weren't in a class with tired tractors ? ------------- Randy Freshour,Member Indiana AC Partners, http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com |
Posted By: allisrutledge
Date Posted: 04 May 2011 at 3:14pm
|
Randy, We were pulling for fun, I think there were 11 concrete weights 500 lb each when the 40 Cockshutt with 20 " drawbar couldnt pull any more. they added 1 more weight and the M pulled it also. The m's drawbar was 14" . I think it could have went one more round but i felt as if that was enough. No mater how you figure the 37 crawler can still pull its own weight. What percentage did they pull at Nebraska? PS , We were all tired !!! HA HA ------------- Allis Chalmers still exist in my mind and barns |
Posted By: Rfdeere
Date Posted: 04 May 2011 at 3:42pm
|
I bet she would have pulled at least another 1000 lbs ! We do a dead weight pull here to and its just a fun pull, but we do figure the percentages just for braggin' rights !! ------------- Randy Freshour,Member Indiana AC Partners, http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com |
Posted By: Coke-in-MN
Date Posted: 04 May 2011 at 3:49pm
|
I know one thing for sure , my HD5G can not pull out a fully-loaded concrete truck with 12 yards in the drum when burried to the point it can not move under it's own power with 6 wheel drive. ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: everett048
Date Posted: 04 May 2011 at 3:50pm
| Test no, 239 in low gear M,s can pull 5009 lbs or 73% of its own weight at 2.05 mph and putting out 23.8 horse power. |
Posted By: allisrutledge
Date Posted: 04 May 2011 at 4:00pm
|
This little M must just be broke in and in the prime of its life!! like me. Scott ------------- Allis Chalmers still exist in my mind and barns |