Allis snap coupler disk ?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30139
Printed Date: 06 Mar 2025 at 10:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis snap coupler disk ?
Posted By: Joe(OH)
Subject: Allis snap coupler disk ?
Date Posted: 02 May 2011 at 8:25pm
|
I'm needing information on the lift chains for an Allis snap coupler disk. If anyone has the lift parts for sale let me know, other wise if someone could get me some pictures and a measurements it would sure would be appreciated. Thanks, Joe ------------- Life is simpler when you plow around the stump. |
Replies:
Posted By: Chad(WI)
Date Posted: 03 May 2011 at 5:54am
| What model, Joe? |
Posted By: Chris/CT
Date Posted: 03 May 2011 at 6:16am
| My old WD 8' disc had a twist chain on R/L side up to a small lift bracket that bolted to lift arm's. I have 1 bracket available for sale. Chain is/was 3/8" dia +/-. |
Posted By: Joe(OH)
Date Posted: 03 May 2011 at 11:47am
|
Im not sure what model it is, but when I get it home I will take a picture. Thanks, ------------- Life is simpler when you plow around the stump. |
Posted By: Joe(OH)
Date Posted: 09 May 2011 at 9:29pm
  Heres a few pictures: ------------- Life is simpler when you plow around the stump. |
Posted By: John (C-IL)
Date Posted: 09 May 2011 at 9:35pm
| That's a 200 series. The traction booster setup will be the same for all of them. I took mine off because it makes the tractor impossible to turn when the disc is up. At least you have the pulley. That is probably the hard part to find. There is a bar that goes between the lift arms with lift arm latch bars on it. The chain runs from one end of the bar to the other through the pulley. |
Posted By: Matt MN
Date Posted: 09 May 2011 at 10:28pm
Here is a picture of what you are looking for. this is on a grain drill.
 ------------- Unless your are the lead horse the scenery never changes!! |
Posted By: Chad(WI)
Date Posted: 10 May 2011 at 6:08am
| Joe...I might have the chain, but not the bar. I'll look and let you know. |
Posted By: Fields
Date Posted: 10 May 2011 at 6:33am
I have one like that. They were also availible as a pin hitch.
|
Posted By: roadrunner(IN)
Date Posted: 10 May 2011 at 6:34pm
| Joe I have the whole thing you need, chain and bar. I'll swap for whatever you have laying around or 20.00. 260-849-0260 |