8030 TB Lever ?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30103
Printed Date: 06 Mar 2025 at 6:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8030 TB Lever ?
Posted By: Michael (WI)
Subject: 8030 TB Lever ?
Date Posted: 02 May 2011 at 10:18am
If you will notice in the picture I have an issue with the cover for the traction Booster lever. The slot with decal for the lever is at the bottom of the cover and someone just cut a notch out of the top for where the lever actually sits. I took the cover off and I do not see how the lever brackets would allow it to orient that low. Do I have a cover from a different tractor is my linkage screwed up? Mike
|
Replies:
Posted By: jiminnd
Date Posted: 03 May 2011 at 9:57pm
| My 8030 doesn't have that lever, is it an early one or a late one? |
Posted By: niel ev
Date Posted: 04 May 2011 at 8:58am
| The late 8000 series had that set up . Is your lever a s shaped if it is I think they have your linkage messed up Niel |
Posted By: Russ-neia
Date Posted: 04 May 2011 at 9:11am
|
Your lever is mounted incorrectly, or the wrong lever has been mounted. It should fit the shield down below, where the slot and decal are. ------------- The innovators offer what others will imitate. |
Posted By: Michael (WI)
Date Posted: 04 May 2011 at 11:58am
| Let me see about getting a picture tonight with the shield off. Thanks for the help so far. |
Posted By: Russ-neia
Date Posted: 04 May 2011 at 9:30pm
Here are some pictures of the OEM lever and parts from my 8010:    ------------- The innovators offer what others will imitate. |
Posted By: Dave in il
Date Posted: 04 May 2011 at 11:41pm
| My 8050 is the same as his 8010 |
Posted By: Steve M C/IL
Date Posted: 05 May 2011 at 8:44pm
| ditto for my 8070 |
Posted By: Michael (WI)
Date Posted: 09 May 2011 at 9:05am
Thanks a bunch Russ. Looks like somebody put a different lever on, I wonder what is originally off of? Your interior certainly looks a lot better than mine, i guess it is getting time for a new cab kit. Mike
|
Posted By: Orange Blood
Date Posted: 09 May 2011 at 9:17am
|
That used to be the right lever. You can see were it broke off at the bottom, then somebody fixed it by cutting off the offset, and welding it on up top, that is not a factory weld you see there. also looks like the bend at the knob has been striaghtened may even be vice marks there too. Probably better design, but the cover dosen't work with it that way. ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: Michael (WI)
Date Posted: 09 May 2011 at 10:02am
| I think that is a very likely senario Orange Blood. Anybody have a good used lever and cover available? Mike |