CA axle clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29972
Printed Date: 04 Mar 2025 at 10:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA axle clutch
Posted By: Dave H (NE)
Subject: CA axle clutch
Date Posted: 29 Apr 2011 at 9:23pm
| what holds the clutch in the final drive housing? and how do you guys remove it? thanks Dave |
Replies:
Posted By: Wil M (NEIA)
Date Posted: 29 Apr 2011 at 9:53pm
|
If I remember right, the final drive axle goes in one end and the axle that goes into the transmission. You need to remove the brakes and the final drive housing off of the tractor.
  Hope this helps
Wil ------------- "Yet there are soulless men whose hand and brain tear down what time will never give again." Anderson M Scruggs |
Posted By: GregLawlerMinn
Date Posted: 30 Apr 2011 at 9:49am
|
All those I have done were held by a key on the outboard axle shaft (no set screw or clips, just slid onto the axle and half moon key). Most came out easily after the final was pulled off the tractor; some had to be "coxed" using pry bars thru the access hole in the final. ------------- What this country needs is more unemployed politicians-and lawyers. Currently have: 1 D14 and a D15S2. With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC |
Posted By: Dave H (NE)
Date Posted: 30 Apr 2011 at 7:22pm
| thanks Greg that is what I needed to know. this one is stuck on the final drive |