Farm Equipment - 80 R mower

Print Page | Close Window

80 R mower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29899
Printed Date: 04 Mar 2025 at 5:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 80 R mower

Posted By: cuttman
Subject: 80 R mower
Date Posted: 28 Apr 2011 at 12:56pm

I am looking for rock guards for this mower, they are stub guards with the number 804848 on them, any suggestions. Thanks, also I'm new to this forum and look forward to using it and getting advice from knowledgeable people.

Replies:

Posted By: John In.
Date Posted: 28 Apr 2011 at 4:45pm

Welcome to the site Cuttman. I think you can get them at TSC. Take one with you since they do have different sizes.

Posted By: Dave in il
Date Posted: 28 Apr 2011 at 5:52pm

You should be able to use universal fit guards from TSC or Farm & Fleet, etc.

Posted By: Chris/CT
Date Posted: 28 Apr 2011 at 6:57pm

Have pail full of them guards. I have the better ones with the hardened seats also, they require work removing them from cutterbar.

Posted By: cuttman
Date Posted: 28 Apr 2011 at 7:48pm

Chris

Would you be interested in selling some, mine look similar to a triangle with about a 2" long shaft. Not a very good description,sorry. I can't find them anywhere around here. TSC and Farm and Fleet have the rock guards that are about 5-6" long and pointed on the end. I need the guards that are called stub guards. Thanks

Posted By: Chris/CT
Date Posted: 28 Apr 2011 at 7:50pm

Can't help with the stub guards, can't say I have even seen those style, I will look in my pts book to check it out.

Posted By: cuttman
Date Posted: 28 Apr 2011 at 8:02pm

OK Thanks, these are different looking, but they don't clog up when cutting short hay.

Posted By: Chris/CT
Date Posted: 28 Apr 2011 at 8:22pm

I just looked thru all my parts books, and cannot find that stub guard, please post picture here so I can see it for future reference, Thanks,Chris/CT

Posted By: Chris/CT
Date Posted: 28 Apr 2011 at 8:22pm

Are those sickle sections not pointed for those stub guards? I assume they must be, otherwise there would be no protection for there tips. I was thinking you could cut-off some pointed one's??

Posted By: cuttman
Date Posted: 28 Apr 2011 at 9:07pm

Chris

They are blunt on the front edge about a 1/2". I'm not sure how to post a picture but would be open to lesrning if you know how to. That way if you see them you may reconize them and I may be calling them by the wrong name. thanks Gregg