Farm Equipment - D15 II 3pt question

Print Page | Close Window

D15 II 3pt question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29892
Printed Date: 04 Mar 2025 at 7:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D15 II 3pt question

Posted By: BIG MIKE
Subject: D15 II 3pt question
Date Posted: 28 Apr 2011 at 10:15am

I have a D15 with factory 3pt.When i got it lower lift arms were missing for some reason.Can anyone tell me what the lift arms should measure from ball center to ball center and how far back the hole for chains and adjusters should be.Thanks Mike

Replies:

Posted By: Calvin Schmidt
Date Posted: 28 Apr 2011 at 11:45am

Ball to ball on the D-15 is 32" Lift arm attaches 12.5" from the rear ball center.

-------------
Nothing is impossible if it is properly financed

Posted By: BIG MIKE
Date Posted: 28 Apr 2011 at 11:48am

Thanks Calvin does it matter on the chains.Thanks Mike

Posted By: Calvin Schmidt
Date Posted: 28 Apr 2011 at 11:54am

Chains fasten 3" ahead of the lift arms

-------------
Nothing is impossible if it is properly financed

Posted By: BIG MIKE
Date Posted: 28 Apr 2011 at 12:47pm

Thanks again Calvin took a load of guess work out of it for me.Thanks Mike