Farm Equipment - three point conversion ?

Print Page | Close Window

three point conversion ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29670
Printed Date: 04 Mar 2025 at 11:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: three point conversion ?

Posted By: TomYaz
Subject: three point conversion ?
Date Posted: 24 Apr 2011 at 10:13am

Got a cross three point conversion for my wd45...

Question on the top link bracket....its nothing more than a u-shape with a couple bolt holes. One set of holes for the arm, the other to keep the bracket on the tractor lift shaft..

But what is to keep this bracket from sliding all over the tractor lift shaft???

-------------
If its not an All-Crop, it all crap!

Replies:

Posted By: BobHnwO
Date Posted: 24 Apr 2011 at 10:15am

nuthin!

-------------
Why do today what you can put off til tomorrow.

Posted By: DaveKamp
Date Posted: 24 Apr 2011 at 10:18am

Like Bob said... it's just clamped on. Really, since the top link can swing every-which-way, there's not enough side-load to make it take a walk.

Posted By: Brian G. NY
Date Posted: 24 Apr 2011 at 4:55pm

I simply put two muffler clamps on either side of my homemade top lnk bracket to keep it centered.

Posted By: steve(ill)
Date Posted: 24 Apr 2011 at 5:18pm

in reality the rock shaft rotates, but the bracket dont. It always points directly at the top link pin on the implement. Straight pull.

-------------
Like them all, but love the "B"s.

Posted By: Dakota Dave
Date Posted: 24 Apr 2011 at 5:23pm

I had to put a muffle clamp on each side of the bracket to keep it from sliding back and forth.

Posted By: David Gibson (OH)
Date Posted: 24 Apr 2011 at 6:07pm

Mine is like Brian and Dave's. I have a muffler clamp on each side.

-------------
David Gibson
http://www.darkecountysteam.com" rel="nofollow - http://www.darkecountysteam.com
1956 WD45

Posted By: TomYaz
Date Posted: 24 Apr 2011 at 11:19pm

Sounds like its not much to worry about...

Thanks Guys..

Tom

-------------
If its not an All-Crop, it all crap!