60 series plow parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29558
Printed Date: 04 Mar 2025 at 8:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 60 series plow parts
Posted By: randy
Subject: 60 series plow parts
Date Posted: 22 Apr 2011 at 9:06am
  I need 2 bearing caps for a concave cutter, tried trailer caps wont fit must be a special size. I thought some of you with the plow patrs booke could give me a part nimber to see if any dealer had some sitting on a shelf some where. Thanks. Randy
Will try to find the piow pic. ------------- CA WD WD45 D17 D17 Diesel 7060 8050 8070 |
Replies:
Posted By: randy
Date Posted: 22 Apr 2011 at 9:08am
|
Also did any of these come with a gauge wheel? My book doesnt show one.
Thanks Randy ------------- CA WD WD45 D17 D17 Diesel 7060 8050 8070 |
Posted By: Gerald J.
Date Posted: 22 Apr 2011 at 10:34am
|
Model 64 semi mounted plow. Has the gauge wheel in the pictures. Gauge wheel hub cap is 327531. Coulter cap is 328279. Dimensions aren't given in the plow bottoms book. Normally the cap is the same size as the OD of the adjacent bearing cup. No doubt its metric. The adjacent cup is 211897, I don't have a cross to bearing maker's number. Baum Hydraulics has several sizes of such hub caps, as does Shoup. I'm not sure either place's search engine can find them, but you can down load the Baum catalog by section, you want the section with wheel hubs. You want section F, look for grease caps. They have a wide selection. 20 sizes. www.baumhydraulics.com. At www.shoupparts.com search for "dust cap." Their results are less friendly. But for both you need to know the size. Gerald J. |
Posted By: Butch(OH)
Date Posted: 22 Apr 2011 at 10:46am
|
We have a 70 series plow with that style coulter and I never found a cap that would fit and had to turn out a pair on the lathe. |