Farm Equipment - needing plow shares

Print Page | Close Window

needing plow shares

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29331
Printed Date: 04 Mar 2025 at 12:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: needing plow shares

Posted By: gh-in-oh
Subject: needing plow shares
Date Posted: 18 Apr 2011 at 3:09pm

Hello all,

I have an old two bottom plow for a CA. It is the pin hitch not the SC. Anyhow, i am in need of some new shares (points) and was wondering if anybody could help me out. The casting number on the back of the old share is 7U 308804 Deutz Allis. Thanks in advanced for any help you have to offer.

Replies:

Posted By: Gerald J.
Date Posted: 18 Apr 2011 at 4:17pm

You said the magic number. That's used on the 25 and 325 bottoms. 14" right hand. Share numbers that fit are: 308801, 309246 (alfalfa), 323651 (FCDS), 308804, 308837 (NCDS), 308807, 309222 (NCDS). The first three are soft center steel, the next two are solid steel and the last two are chilled iron. DS stands for deep suck, FC for full cut, NC for narrow cut.

Plow bottom parts are mostly independent of the plow frame, separate book and most frames will take most bottoms of matching width. Some frames are adjustable width within limits.

Gerald J.