Super six loader cylinders?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29293
Printed Date: 02 Aug 2025 at 10:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Super six loader cylinders?
Posted By: bwp
Subject: Super six loader cylinders?
Date Posted: 17 Apr 2011 at 7:37pm
Hey everyone,
I am trying to locate a pair of replacement cylinders for the super six loader on my D19. The loader is a newer model super six with arched loader arms. The loader arm cylinders have a crosstube that mounts to the bottom of the loader frame and a tang welded to the cylinder that mounts on the underside of the loader arms. I have searched all over the web and could not find cylinders with a tang mount. I have read that the super six loaders were sold to Daffin and then eventually merged with Farmhand. The article stated I may still be able acquire super six parts from Farmhand. Well since Farmhand is part of Agco, do you guys think I would be able to find these cylinders, or do you have any other options I could try. I know I could have them custom built, but saving that as a last resort.
Thanks,
Brad
|
Replies:
Posted By: Coke-in-MN
Date Posted: 17 Apr 2011 at 7:58pm
Check with a hydraulic shop on making new ones or like i did I found a set of cylinders and cut lug off old ones and welded onto the replacement cylinders ,
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: bwp
Date Posted: 17 Apr 2011 at 9:23pm
Coke,
Yeah I am also thinking about that. Wanted to see if anyone on hear had some input.
Thanks
|
|