WC Belt pulley
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29239
Printed Date: 03 Mar 2025 at 9:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WC Belt pulley
Posted By: Thad in AR.
Subject: WC Belt pulley
Date Posted: 16 Apr 2011 at 8:45pm
| I have 3 belt pulleys 2 locked up and one turns free. I bought the one that turns free at an auction and it was wraped in canvas and packed with grease. I want to pull the pulley off and sandblast it. My question is does it have a seal I should replace? My second question is should I just get a delete plate and not use it? It's just a show tractor. Is the pulley hard to remove? |
Replies:
Posted By: JoeM(GA)
Date Posted: 16 Apr 2011 at 9:48pm
Thad, it's nothing but a nut and key on a tapered shaft ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: ChuckLuedtkeSEWI
Date Posted: 16 Apr 2011 at 9:57pm
|
The pulley is not that hard to remove, just pull out the set screw and remove. Just remember if it is installed, every time you have the tractor running and the clutch out it will be spinning. I think there is a way to pull it out of gear and pinch the set screw down so it doesn't spin when the tractor is running. I have always taken mine out when I'm not using it. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: Jim Hancock
Date Posted: 16 Apr 2011 at 10:54pm
|
Hi Thad.
You can pull it out about 3 inches to disengage the pulley, just out of reach of the gear teeth. Test spin it to see if you feel/hear anything that indicates gear teeth contact. Pretty simple deal. HTH. Jim
|