Farm Equipment - 190 xt problem

Print Page | Close Window

190 xt problem

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29124
Printed Date: 03 Mar 2025 at 4:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 xt problem

Posted By: ACscott
Subject: 190 xt problem
Date Posted: 14 Apr 2011 at 2:47pm

On our 190 xt if you put it into 7/8 gear it will sit there and grind, but if your driving it and shift it into 7/8 it will be fine. What could be the problem? Thanks

Replies:

Posted By: smokey
Date Posted: 14 Apr 2011 at 6:54pm

I don't know!

Hope it's not bad

Posted By: Lonn
Date Posted: 14 Apr 2011 at 10:07pm

Are you saying that if the tractor is running and you climb on and push the clutch in and shift it grinds? Do you give it a few seconds so the transmission stops spinning? Could be that the fingers on the clutch aren't being fully depressed by the throwout bearing. Dad's 190 had the fingers ground down from a bad throwout bearing and you couldn't shift it without grinding so it got a clutch job.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: DaveCinIN
Date Posted: 14 Apr 2011 at 11:18pm

On mine I usually have to let the clutch out a little for it to go into gear if it is sitting still. If its rolling it goes right in gear.

Posted By: Jim Hancock
Date Posted: 15 Apr 2011 at 12:58am

Hi AC,

Lonn is on the right track. Sounds like the transmission is spinning.

Try this next time: put it in reverse,(hopefully w/o grinding), and immediately out of reverse and into 7/8, aka 4th.

Is your engine at idle, or idling fast? This sometimes makes a difference in how easy it goes in. High idling/fast engine speed, I've noticed, makes the "grinding" into gear. You might try slowing it to idle or so and see what that does.

See if it drops right in without the grinding. HTH. Jim