Farm Equipment - NH 411 Discbine

Print Page | Close Window

NH 411 Discbine

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29024
Printed Date: 26 Jun 2024 at 12:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: NH 411 Discbine

Posted By: NDCurt
Subject: NH 411 Discbine
Date Posted: 12 Apr 2011 at 8:51pm

Anybody got any experience with a NH 411 discbine? pros cons where they made by someone else? How would it be to haul one? Thanks

Replies:

Posted By: Tony.Or
Date Posted: 12 Apr 2011 at 9:04pm

Be sure you can get parts for it !! Friend has one with main gear box out, $2,400 to replace it. It`s still setting. Tony

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Posted By: acd21man
Date Posted: 12 Apr 2011 at 9:06pm

best mower weve had just a little slow next to the JD 275 discmower

-------------
2 wd 45,2 D-17 diesel/gas 3 pt, 220,d21, 4020,2 4430s used daily http://www.youtube.com/channel/UCudh8Xz9_rZHhUC3YNozupw

Posted By: AdamA
Date Posted: 12 Apr 2011 at 9:44pm

we've got one, really like it parts are a little high but most everything can be sourced locally, bearings etc.... had new shields made at a local fab shop turned out really nice! don't know how far your going but they tow very well centered behind your truck, as long as tires/bearings are in good shape 50mph is no problem.

-------------
57'D-17,78'185,83'6080,76'7040,84'8030 FWA.02'Dodge cummins

Posted By: kffischer
Date Posted: 12 Apr 2011 at 10:14pm

3 or more cutterbar revisions on that model. If your serial starts with 88 you're probably in good shape, as those are the latest models. Ours is a few hundred below the exact change number, and we still have little problem getting parts. An early one I'm not sure on parts. We bought ours used with a new cutterbar and after about 5 years had to replace it again at about the same price as we purchased it for (with dealer installing). Fields have rocks here and there, probably not the machine's fault. Still cheaper than new and better than another used one. Our particular serial number has the cutterbar available as an assembly, but i think the older and newer are components only...

The cutterbars are Kuhn but there are so many variables that it's easiest to just deal with NH. Crossover info is very rare. Get the genuine knives, there is no comparison with the aftermarket ones.

good machine in my opinion. If you go newer model numbers, they are all NH's own design and parts and of modular design.

karl f

Posted By: NDCurt
Date Posted: 12 Apr 2011 at 10:53pm

Thanks all for the info. I'm shopping and within my price range I'm looking at the older NH's. Good parts availability for NH here (if in the NH system) Not much for the smaller machines around here so therefore the question about hauling. Thanks