Farm Equipment - Hydraulic Connections for D17 IV Loader

Print Page | Close Window

Hydraulic Connections for D17 IV Loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29019
Printed Date: 03 Mar 2025 at 11:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hydraulic Connections for D17 IV Loader

Posted By: rhartwick
Subject: Hydraulic Connections for D17 IV Loader
Date Posted: 12 Apr 2011 at 6:35pm

I just re-acquired our old D17 IV. The PO mounted an aftermarket loader with hydraulic bucket, using the single rear remote outlet. He operated it by wiring the remote lever forward. The loader has its own set of dual hydraulic controls for the loader/bucket operation.

My question is, can I re-plumb the hydraulic system so the that loader can operate independently with the live pump, so I don't have to cludge the hoses to the rear remote?

Replies:

Posted By: Stan R
Date Posted: 12 Apr 2011 at 8:26pm

we have a IV with a loader and we intercepted discharge lines on the side mounted pump. The hydraulics are live (clutch does not affect use of the loader).

Posted By: MACK
Date Posted: 12 Apr 2011 at 10:07pm

IF your loader valve has a relief valve in it, you can run from pump to loader valve IN port and out from OUT port to IN port of tractor valve. If loder valve DOES NOT have a relief valve don't hook it up. MACK