WD Shifter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28838
Printed Date: 03 Mar 2025 at 3:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD Shifter
Posted By: fixer1958
Subject: WD Shifter
Date Posted: 09 Apr 2011 at 7:01pm
|
I took the shifter out of My WD today to see what I could do to tighten it up a little and build up the end so it wouldn't flop around so much. From the looks of it, from the boot down, it looks, like it had been salvaged from a ship wreck. WTH, I have had this beast for 20 years and it has never once set out in the rain. I'm guessing it's from condensation and not much oil gets thrown up in that direction. I shoot some grease in there every now and again, but sheesh.
Anybody sell shift rods and the other misc stuff in there. Looks like a washer (from the book, it's not there) and a chamfered ring that came out with the shifter below the snap ring?
I got the end built up, and that's fine now, but the ball on the shaft is beyond hope. 2 sticks of brazing rod and a day of dicking with it might work, but I don't have any dimensions.
Any ideas?
|
Replies:
Posted By: captaindana
Date Posted: 09 Apr 2011 at 7:33pm
|
I'd grab a good used one from a parts tractor.
|
Posted By: j.w.freck
Date Posted: 09 Apr 2011 at 10:33pm
|
ck with dean ag,spend eighty something dollars and get something that fits...
|
Posted By: David(Stockbridge)MI
Date Posted: 10 Apr 2011 at 6:37am
|
We have the new shift handles, washer and snap ring, and the square guide pins in standard and oversize. David 734-320-3470
http://www.djstractorparts.intuitwebsites.com - www.djstractorparts.intuitwebsites.com
-------------
All "NEW" Web Site http://www.djstractorparts.com
2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler
|
|