Farm Equipment - 1300 Field Cultivator ?

Print Page | Close Window

1300 Field Cultivator ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28809
Printed Date: 02 Mar 2025 at 3:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1300 Field Cultivator ?

Posted By: Michael (WI)
Subject: 1300 Field Cultivator ?
Date Posted: 08 Apr 2011 at 9:37pm

I took all (4) of the axle stub shafts off a few months ago to put new bearings in and give them a coat of paint. Two have zerks in the outer cap and two have zerks on the backside of the hub. I did not take notes and now I cannot remeber which went on the main frame and which went on the wings. Could somone shed some light on this for me? Mike

Replies:

Posted By: jiminnd
Date Posted: 08 Apr 2011 at 9:55pm

Kind of a question? any chance one set is four bolt and one set is six bolt? my IH cult is that way so thought maybe the AC was too.

Posted By: Eric[IL]
Date Posted: 08 Apr 2011 at 11:19pm

Michael WI, - sounds like something I would do also. You might look to see if there is a close shovel on either side of the hubs? Perhaps, they mounted the hubs in such a way as to minimim dirt being thrown towards the grease zerk. If so, then if the hub has a grease zerk on the outer side, the closest shovel to that hub would be positioned next to the inner side of the hub & visa versa. That is just my guess?? I have one that I can look at more closely tomorrow and let you know if I see otherwise.

Posted By: BobHnwO
Date Posted: 09 Apr 2011 at 7:03am

Hubs with zerks on the backside would go on the wings so you can grease with wings folded up.

-------------
Why do today what you can put off til tomorrow.