5020 Allis 66 on a 5030, will it work?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28790
Printed Date: 02 Mar 2025 at 2:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 5020 Allis 66 on a 5030, will it work?
Posted By: lefty
Subject: 5020 Allis 66 on a 5030, will it work?
Date Posted: 08 Apr 2011 at 5:42pm
|
Hello all, thanks for the forum, its hard to find answers for this stuff else where on line. I have a 1980 Allis Chalmers 5030 and I am about to drive 1.5 hours out to buy a Allis Chalmers "66" tiller sight unseen. My question is that all I can find online is photos of manuals listing a Allis Chalmers 5020 tiller model "66", is that due to a gear box limit of under 26 hp? or can it handle more hp? Thanks to all who can help.
|
Replies:
Posted By: Fellenz
Date Posted: 08 Apr 2011 at 5:46pm
I'm not familiar with the Allis tillers but if they have a slip clutch on the PTO input shaft you don't need to worry about horsepower going in as you'll slip the clutch before breaking anything if it's adjusted properly.
If it doesn't have a slip clutch they're generally pretty easy to add aftermarket.
|
Posted By: 427435
Date Posted: 08 Apr 2011 at 6:45pm
There could be a different PTO speed between the tractors. I seem to remember that there was a 1500 rpm PTO speed on some of those Jap tractors.
Edit: I guess I was remembering some of the Simplicity built garden tractors. The 5020 and 5030 are both 540 rpm PTO's------you should be fine.
-------------
Mark
B10 Allis, 917 Allis, 7116 Simplicity, 7790 Simplicity Diesel,
GTH-L Simplicity
Ignorance is curable-----stupidity is not.
|
|